manufactures as a partner module

Hi,

in my website www.climbe.cal.pl I have a module "partnerzy Climbe" which was caled by you as a manufactures. On your demo site it shows manufactures but my website is working only like a catalog and I am the only one manufacurer. It is brand website so there will not be more manufactures. So, I wish to use this this module only to present our partners, such as: shops, portals etc. How I can put in this module logotypes our partners?

I cannot understand how it works, in what way I should load logotypes?

regards

Hi

This is a regular image show module where each slide is a separate image. You just need to change slides in this module to the one You want.

Hi

This is a regular image show module where each slide is a separate image. You just need to change slides in this module to the one You want.

unfortunately it is a news show pro module GK5 so it is impossible to put my regular slideshows
So I think there must be a different way. In data source category manufactures is marked but I cannot find the same way on your demo. I didnt see any articles with manufactures.

Can You check your demo site and tell me how monufactures logotypes are put into this module?

regards

Hi

Sorry, my mistake. I've done this with Image Show once, so I wrongly assumed it's the same case.

Manufacturers images are taken from joomla regular articles in category Manufacturers. You can set new images in right column under tab "Images and links"

aaaa.. everything is in articles in kategory. Now I understand Thanks, I will never think about it

Now it should be easy. If I find any problems I will write, but I supose this is what I am looking for.

regards

Hi

Of course, please do not hesitate to list all Your questions in this thread.

Hi,

unfortunatly, I found another problem with this module Manufactures. The problem is with thumbnails and their automatic resizing. I think this option is not working properly. Even though there is information about automatic resizing this option didnt work properly. Maybe I made some mistakes because lot of logotypes are different?

I think this options didnt resize properly. Logotypes are bigger than options said and are not all visible. You will see it on page www.climbe.cal.pl

Options in module was set in different configuration. Original 144x81, latter 300x120 etc. Every time when I cut the logo to this resolution the module did this bigger than is shown in options.

Can You explaine how I should preper logotypes to see it properly? Yesterady I spent 3 hours fighting with this and still not working. I was testing lot of different configuration and none was not good.

I am loosing my faith that can work as it should.

regard

Hi

All logos has been processed to fit to the dimentions of 172x97 as configured. Can You please explain what is the problem ? I think it works ok.

Yes Teitbite, thanks for watching my site I made mistake with dimensions, that is way logotypes was strange. I did 172x97 corectly, and now everything is in ordnung

Thanks for help

regards

Hi

No problem, I'm glad it's ok now