listbox does not appear

Hi,

I follow Tabs GK4 set up instruction Tabs GK4 (https://www.gavick.com/documentation/jo ... /tabs-gk4/). After I chosen content type no listbox appear as to chose
a module to be assigned.
Screencast (40 sec. video): http://youtu.be/IxkudyyeKvQ
I also could not find detailed instructions on how to use Tabs GK2.
Please, give me a clue how to put Tabs GK4 to work.

Regards.

Hi,
It was, at the bottom 'tab1'.

Hi,
It was, at the bottom 'tab1'.

Hi,

I am still can't get how to connect a module to content of the tab. For instance I need to be shown an article in the tab.
OK, I select a tab in content list to define tab's content, but there is no anything connected to that tab.
So, how I "join" tab and an article together

Thanks

You need publish NSP GK4 module in one of 'tab' position. For example tab1,tab2,tab3 etc. Then in Tabs module in your tab you are choosing 'module' as a type and you select this tab position you used to publish NSP GK4 module.

You need publish NSP GK4 module in one of 'tab' position. For example tab1,tab2,tab3 etc. Then in Tabs module in your tab you are choosing 'module' as a type and you select this tab position you used to publish NSP GK4 module.

All sorted out!
Thank you very much.

I'm glad I could help