listbox does not appear

Tabs Joomla module is the easiest way to create and manage your content via tabs.
Rate this topic: Evaluations: 0, 0.00 on the average.Evaluations: 0, 0.00 on the average.Evaluations: 0, 0.00 on the average.Evaluations: 0, 0.00 on the average.Evaluations: 0, 0.00 on the average.Evaluations: 0, 0.00 on the average.
GK User
Tue May 15, 2012 5:42 pm
Hi,

I follow Tabs GK4 set up instruction Tabs GK4 (https://www.gavick.com/documentation/jo ... /tabs-gk4/). After I chosen content type no listbox appear as to chose
a module to be assigned.
Screencast (40 sec. video): http://youtu.be/IxkudyyeKvQ
I also could not find detailed instructions on how to use Tabs GK2.
Please, give me a clue how to put Tabs GK4 to work.

Regards.
User avatar
Fresh Boarder

Konrad M
Wed May 16, 2012 12:51 pm
Hi,
It was, at the bottom 'tab1'.
User avatar

GK User
Fri May 18, 2012 10:26 am
Konrad M wrote:Hi,
It was, at the bottom 'tab1'.


Hi,

I am still can't get how to connect a module to content of the tab. For instance I need to be shown an article in the tab.
OK, I select a tab in content list to define tab's content, but there is no anything connected to that tab.
So, how I "join" tab and an article together

Thanks
User avatar
Fresh Boarder

Konrad M
Fri May 18, 2012 10:30 am
You need publish NSP GK4 module in one of 'tab' position. For example tab1,tab2,tab3 etc. Then in Tabs module in your tab you are choosing 'module' as a type and you select this tab position you used to publish NSP GK4 module.
User avatar

GK User
Tue Jun 05, 2012 6:14 am
Konrad M wrote:You need publish NSP GK4 module in one of 'tab' position. For example tab1,tab2,tab3 etc. Then in Tabs module in your tab you are choosing 'module' as a type and you select this tab position you used to publish NSP GK4 module.

All sorted out!
Thank you very much.
User avatar
Fresh Boarder

Konrad M
Tue Jun 05, 2012 7:34 am
I'm glad I could help :)
User avatar


cron